Setting Up and Connecting the Charging Station

The right location for the charging station is crucial for your Mammotion robot to reliably find it and charge correctly.

Applicable to: LUBA 2 AWD, LUBA 3 AWD, LUBA mini AWD, LUBA mini 2 AWD, YUKA series

Choosing the location

• Choose a flat, stable surface (e.g. patio, concrete slab)
• The location can be covered – but not inside a metal housing
• The spot should not be too dark
• Leave enough clear space in front of the station so the robot can dock without obstruction

Connecting the charging station

1. Place the charging station at the chosen location
2. Route the power cable safely and without tension
3. Connect the power cable to a power outlet
4. Check that the LED indicator on the power supply is lit – this shows the station is ready

Important: Do not move the charging station after mapping. If you move it, the mowing area map must be recreated.