Skip to content
  • There are no suggestions because the search field is empty.

First Charge – How to Charge Your Mammotion Robot Before First Use

Step-by-step guide for charging your device for the first time

Fully charge your Mammotion robot before using it for the first time. This ensures the battery is properly conditioned and you get maximum runtime from the start.

 

Applicable to: LUBA 2 AWD, LUBA 3 AWD, LUBA mini AWD, LUBA mini 2 AWD, YUKA series, SPINO E1

 

First charge SPINO E1 – step by step:

  1. Remove the rubber plug from the charging port
  2. Connect the charger to the robot's charging port
  3. Plug the charger into a power outlet
  4. Wait until charging is complete
 

First charge LUBA / YUKA – step by step:

  1. Place the charging station in its designated location
  2. Connect the charging station to the power supply
  3. Manually guide the robot to the station or place it on the charging contacts
  4. Wait until the battery is fully charged
 

Important safety notes:

  • Never charge the SPINO E1 outdoors in the rain
  • Make sure the charging port and charger connector are as dry as possible
  • For long-term storage: apply anti-rust agent to the metal contacts
 

Tip: Always complete the first charge fully – do not interrupt it early.