Skip to content
  • There are no suggestions because the search field is empty.

AutoWash™ Dock: Setting up the clean and dirty water tanks

How to fill and empty the water tanks of your AutoWash™ Dock before first use.

Preparing the water tanks before the first cleaning

Your AutoWash™ Dock has two water tanks: a clean water tank and a dirty water tank. Both must be correctly installed before the first cleaning.

Filling the clean water tank

  1. Remove the tank: Lift the clean water tank from the top of the dock.
  2. Open the latch: Lift the latch on the tank to open it.
  3. Fill with water: Fill the tank with clean tap water up to the MAX line. Do not use distilled water or cleaning agents.
  4. Close the lid: Close and lock the lid carefully.
  5. Reinsert the tank: Place the clean water tank back into the dock.

Preparing the dirty water tank

  1. Remove the tank: Lift the dirty water tank out.
  2. Check it is empty: Make sure the dirty water tank is empty.
  3. Reinsert the tank: Place the empty dirty water tank back into the dock.

LED indicators

  • "Clean water tank" LED on: Tank is empty or missing. Please refill.
  • "Dirty water tank" LED on: Tank is full or missing. Please empty.

Applicable models

Applies to: Roomba Plus 405, Plus 406, Plus 505, Plus 515, Max 705 (all with AutoWash™ Dock).